BQTWQ - PROPANE IN HC FREE AIR

  • MSDS: BQTWQ
  • Manufacturer: SCOTT SPECIALTY GASES
  • Product Name: PROPANE IN HC FREE AIR
  • National Stock Number: 6830-00N037437
Product Identification

Product ID:PROPANE IN HC FREE AIR
MSDS Date:01/21/1986
FSC:6830
NIIN:00N037437
MSDS Number: BQTWQ

Responsible Party
SCOTT SPECIALTY GASES
ROUTE 611 NORTH
PLUMSTEADVILLE, PA 18949
US

Emergency Phone: 215-766-8861

Info Phone: 215-766-8861

Cage: 51847

Contractor
SCOTT SPECIALTY GASES
310 PLUMSTEADVILLE, PA 18934 US

Telephone: 215-766-0416

Cage: 51847

Ingredients

1000 PPM - 1.5%

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: SEE ING

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


AIR, REFRIGERATED LIQUID; AIR COMPRESSED (UN1002, DOT); AIR

RTECS: AX5271000

Fraction By Weight: BALANCE

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ASPHYXIANT. SYMPTOMS INCLUDE RAPID
RESPIRATION, MUSCULAR INCOORDINATION, FATIGUE, NAUSEA & VOMITING.
PROPANE ACTS AS AN ANESTHETIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . EYES:IMMEDIATELY FLUSH W/POTABLE
WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD .
SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INHAL:REMO VE
VICTIM TO FRESH AIR. PERFORM ARTIFICIAL RESPIRATION IF BREATHING
HAS STOPPED.

Fire Fighting

Extinguishing Media:USE WHAT IS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . KEEP FIRE EXPOSED CYLINDERS COOL W/WATER
SPRAY.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE LEAKING CYLINDER TO
EXHAUST HOOD OR SAFE OUTDOORS AREA. ELIMINATE SOURCES OF IGNITION.
TRY TO STOP LEAK OR REMOVE THE CYLINDER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A WELL VENTILATED AREA AWAY
FROM OXIDIZERS, HEAT & SOURCES OF IGNITION.
Other Precautions:DO NOT DEFACE CYLINDERS OR LABELS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA.
Ventilation:LOCAL & MECHANICAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOES WHEN HANDLING CYLINDERS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Vapor Density:1
Solubility in Water:0.085 @ 20C
Appearance and Odor:COLORLESS, PUNGENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
PROPANE REACTS W/OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PROPANE CAN PRODUCE CARBON MONOXIDE
WHEN OXIDIZED W/DEFICIENCY OF OXYGEN.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . ALLOW GAS TO DISCHARGE AT A SLOW RATE. RETURN
DEFECTIVE CYLINDER TO SUPPLIER. PROPANE GAS CAN BE DISPOSED OF BY
BURNING IT OFF IN A FU RNACE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.